The Future of RG6+CAT5e Cable

What does the future for RG6+CAT5e cable hold? Well it has been around more almost 20 years now and it’s still prevalent today. There are many homes that have this RG6+CAT5e cable still installed in their home. You can say that it’s performance still has a place among the many different categories.

At 100Mbps this gives many people just enough power to run a lot of their devices. For the most basic of usage this is ok but with the advancement in technology and capabilities has come a need for more.

With the introduction of 1000Base-T you can push your RG6+CAT5e cable more when using all four pairs for gigabit. While we always recommend to go with the cable that is most reasonable for your situation it might be time to look at the newer generation of category cables.

What to Know About Alarm Shield Cable

While it is a alarm shield cable, it has a wide range of applications, including smoke alarms, smoke detectors, voice communications, microprocessor-controlled systems, pull boxes (fire alarm signals), burglar alarms, and other low voltage applications.

When it comes to fire alarm systems in particular, fire alarm circuits control and power applications such as safety functions, elevator capture and shutdown, damper control, and door release.

According to NEC Articles 760 and 725, there are two types of fire alarm system circuits: power restricted and non-power limited.

Power Limited Fire Alarm Wires typically work at 24 volts DC, whereas non-power limited alarm shield cables run at 120 volts AC. Non-power limited alarm shield cables are typically obsolete since low-voltage alarm shield cable offers greater benefits.