Using a combination of RG6+CAT5e cables for networking purposes can be a creative solution, but it’s essential to understand the limitations and considerations before implementing it.

1. RG6 Cable: RG6 is commonly used for transmitting video signals, especially for cable and satellite TV connections. It has higher shielding and lower loss characteristics compared to older coaxial cables like RG59. While it can carry data signals, it’s not optimized for networking purposes.
2. CAT5e Cable: CAT5e (Category 5e) cable is designed specifically for networking applications. It can handle Ethernet signals up to 1 Gbps (Gigabit per second) and is widely used for both residential and commercial networking. It’s less shielded compared to coaxial cables like RG6, but it’s optimized for data transmission.

Using a combination of RG6+CAT5e cables might be feasible for certain scenarios, but there are several things to consider:

• Data Speed and Compatibility: CAT5e is capable of handling higher data speeds (up to 1 Gbps) compared to RG6, which might be limited in terms of data transfer rates. If you’re aiming for Gigabit Ethernet speeds or higher, using CAT5e for networking connections is recommended.
• Interference and Signal Quality: Coaxial cables like RG6 are generally better shielded against interference compared to twisted-pair cables like CAT5e. This can be important if you’re in an environment with a lot of electromagnetic interference. However, for most residential networking setups, CAT5e or higher (e.g., CAT6) cables are sufficient.
• Connectors and Equipment: You’ll need appropriate connectors and adapters to transition between RG6+CAT5e cables. This can introduce potential points of failure or signal degradation if not done correctly.
• Future-Proofing: While CAT5e is capable of handling current networking needs, using CAT6 or CAT6a cables would provide better support for higher data speeds in the future, which might be important if you plan to upgrade your network.